Optimize Cost Request a quote

Packaging guide · Dry fruit and nuts

Dry Fruit and Nuts Packaging: Pouches, Films and Liners for Retail and Export

Almonds go rancid, dried apricots go sticky, chilgoza loses its value the moment it absorbs a smell. The right pack slows all of that down. This guide covers what spoils dry fruit, which pouch format and film to choose, when nitrogen flushing is worth it, and what export buyers will ask for. Use the pouch selector to get a starting specification.

Printed laminated stand-up pouches for nuts, coffee and tea
Printed laminated stand-up pouches, made to order in Karachi.

What spoils dry fruit and nuts

Good packaging is built around what goes wrong with the product. For dry fruit and nuts, four things do most of the damage. The University of California's postharvest centre summarises them well in its storage recommendations for nuts and dried fruits.

Oxygen and rancidity

Almonds, walnuts, cashews, pistachios and pine nuts are rich in oil. Oxygen reacts with that oil and the nuts turn stale, then rancid. UC Davis notes that oxygen below 1% is very effective at delaying rancidity, and recommends vacuum packing or nitrogen flushing to keep oxygen out. Broken pieces and kernels spoil faster than whole nuts in the shell, so shelled and roasted products need the most protection.

Moisture

Dried apricots, figs, raisins and dates are sugary and hold some moisture. Too much humidity makes them sticky and invites mould. Too little dries them out. Nuts that pick up moisture lose their crunch. In both cases the answer is a moisture-proof film and a strong, continuous seal.

Insects

Stored-product insects are a real risk in dry fruit, especially through a warm summer. Packs need to be insect-proof, which means no pinholes, no weak seals and a closure that is sealed shut before the zipper is ever used.

Light and odour

Light speeds up rancidity in oily nuts. Nuts also absorb smells easily because of their fat content, so they should not travel or sit next to strong-smelling goods. An opaque or metallised film helps with light. A good laminate helps with odour.

Choosing the pack format

The format depends on pack size, how the product is sold and the filling line you have. These are the common choices:

Pack formats for dry fruit and nuts
FormatBest forWatch out for
Stand-up pouch with zipper250 g–1 kg retail packs, gifting, supermarket shelvesLeave room above the zipper for the first heat seal
Three-side seal pouchSmall packs and sachets, 25–250 gLies flat, so it needs a hanger hole or a box for display
Centre-seal pillow bagSnack packs filled on vertical form-fill-seal machinesSupplied as printed roll stock, matched to your machine
Zip lock bagLoose dry fruit sold by weight in shopsPlain polythene gives little oxygen barrier
Liner in a cartonBulk export, 5–25 kgHeat-seal or tie the liner; consider vacuum for high-value nuts

Interactive

Dry fruit pouch selector

Answer four questions for a starting specification to discuss with our technical team.

Format
Stand-up pouch with zipper and tear notch
Film to discuss
Clear laminate such as PET/LDPE, with a printed panel or a window to limit light
Protection
Nitrogen flushing recommended. Oxygen, not moisture, limits shelf life for oily nuts
Documents
ISO 22000 certificate and a food-contact migration test report

A starting point, not a final specification. Shelf life depends on the finished pack, your filling process and storage, so agree a sample trial before you print.

Silver laminated stand-up pouch with a zipper closure, a common format for dry fruit
A zipper makes the pack reclosable, but the heat seal above it is what protects the product until it is opened.

Choosing the film structure

A laminated pouch is two or more films bonded together. Each layer has a job: the outer film carries the print and takes the handling, any barrier layer slows oxygen and moisture, and the inner layer seals. We laminate LDPE, LLDPE, HDPE, PP and BOPP films in-house with up to five layers, and make OPP, PET and LDPE laminated bags. See our lamination page for the processes.

Clear laminates

BOPP/LDPE and PET/LDPE are the usual clear structures. They protect the print, resist punctures from sharp nut edges and keep moisture out well. PET also holds aroma better than polythene alone. They are the right choice when customers want to see the product and the shelf life you need is moderate.

Metallised and opaque films

Blocking light helps oily nuts. A metallised or fully printed pack does that, and a small window can still show the product. Be careful with appearance, though. A metallic finish on its own does not establish an oxygen barrier. If you need a tested figure, see the next point.

Ask for barrier numbers

If shelf life matters to your buyer, set a target oxygen transmission rate (OTR) and water vapour transmission rate (WVTR), with the test method and conditions, and ask for data on the finished laminate. Our barrier films page explains how to write that specification.

Illustration of the separate film layers bonded together in a laminated pouch
Each layer in a laminate does a different job: print, barrier and seal.

Nitrogen flushing and vacuum packing

For nuts, taking oxygen out of the pack is the single biggest step you can take. There are two ways to do it.

Nitrogen flushing

The filling machine replaces the air in the pouch with nitrogen just before sealing. The pack stays soft and the nuts are not crushed, which makes it the usual choice for premium retail pouches. The film must hold the nitrogen in, so pair flushing with a laminate that has a real oxygen barrier.

Vacuum packing

The air is drawn out and the pack is sealed tight around the product. This works well for bulk export packs and dense products such as kernels. Vacuum packs need a tough film that resists punctures, which is why nylon-containing laminates are common. See nylon laminated vacuum bags, and tell us whether your machine is a chamber or external-suction type.

Packaging for export markets

Gulf, China and Asia

Pakistan's dry fruit comes mostly from Balochistan, Khyber Pakhtunkhwa and Gilgit-Baltistan, according to TDAP. Pine nuts are the standout export. Arab News reported in June 2026 that exports to China nearly doubled, from about 580 tonnes in 2023 to 1,147 tonnes in 2025. For long sea and road journeys, bulk nuts travel best in a heat-sealed or vacuum liner inside a strong carton. Gulf buyers will often ask for a Halal and food-grade packaging certificate.

EU and UK

Plastic packaging that touches food in the EU must meet Regulation (EU) No 10/2011, which sets an overall migration limit of 10 mg per dm² of food-contact surface. Since 12 August 2026 the Packaging and Packaging Waste Regulation also applies, with limits on heavy metals and PFAS in food-contact packaging. Our PPWR packaging page lists what an EU importer will ask you for, and what we can supply.

Print and label checklist

  • Product name and net weight
  • Batch number, packing date and best-before date, with space left clear for coding
  • Storage advice, such as "store in a cool, dry place and reseal after opening"
  • Allergen statement. The EU's food information rules require nuts to be emphasised in the ingredients list
  • Halal mark and certifier details, if certified
  • Importer or distributor address for the destination country
  • Barcode, printed large enough to scan on a curved pouch

Printed pouches are made with gravure printing, which needs a cylinder for each colour. Plan artwork early in the year so packs are ready before the winter dry fruit season.

Frequently asked questions

What is the best packaging for dry fruits?

For retail packs of 250 g to 1 kg, a laminated stand-up pouch with a zipper suits most dry fruit and nuts. Oily nuts need an oxygen barrier and ideally nitrogen flushing. Dried fruit needs a moisture-proof film and a strong seal.

How do I stop almonds and walnuts going rancid?

Keep oxygen and light away from them. Use a laminate with an oxygen barrier, flush the pack with nitrogen or vacuum pack it, and store it somewhere cool. UC Davis notes that oxygen below 1% is very effective at delaying rancidity.

Is a zip lock bag good enough for dry fruit?

For loose dry fruit sold and eaten within a few weeks, yes. For shelf packs that must last months, or for oily nuts, plain polythene lets too much oxygen through. A laminated pouch is the better choice.

Should I use nitrogen flushing or vacuum packing?

Nitrogen flushing keeps the pack soft and protects fragile nuts, so it suits premium retail pouches. Vacuum packing suits bulk and export packs of dense products. Both need a film that holds a low-oxygen atmosphere.

How should chilgoza (pine nuts) be packed for export?

Pine nuts are oily and valuable, so protect them from oxygen, moisture and odours. Bulk shipments are usually packed in a heat-sealed or vacuum liner inside a strong carton. Retail packs work well in a nitrogen-flushed laminated pouch.

What documents do export buyers ask for?

Usually a food-contact migration test report and the manufacturer's food-safety certificate. Gulf buyers often ask for Halal. EU buyers now also expect heavy-metals evidence under PPWR. We supply ISO 22000 and Halal certificates and accredited lab test reports.

What is the minimum order for printed dry fruit pouches?

300 kg for printed packaging and 100 kg for plain. Send your pouch size, quantity and artwork and we will quote at the lowest possible factory rate.

Sources

  1. Nuts and dried fruits: storage recommendations, UC Davis Postharvest Research and Extension Center
  2. Pakistan's pine nut exports to China nearly double in two years, Arab News, June 2026
  3. Dry fruits, Trade Development Authority of Pakistan
  4. Regulation (EU) No 10/2011 on plastic food contact materials, EUR-Lex
  5. Regulation (EU) No 1169/2011 on food information to consumers, EUR-Lex

Planning dry fruit packs for this season?

Send the product, pack size and market. We'll propose a pouch and film, from an ISO 22000 and Halal certified plant in Karachi.

Scroll to Top