Product · Garbage bags
Garbage Bags & Bin Liners Manufacturer in Karachi
A bin liner fails in one of two ways: it splits under the load, or it costs more than the job needs. Both come down to choosing gauge and material against the actual waste rather than a catalogue. We make liners in Karachi to the size, thickness and colour your operation runs on.
Materials
HDPE and LDPE
Sizes
Made to your width and length
Colours
Black, red, green and blue
Compliance
Outside the Sindh bag ban
Compliance
Are garbage bags affected by the Sindh plastic ban?
No. Sindh’s ban covers single-use plastic shopping and carrier bags. The Sindh Environmental Protection Agency has stated the scope, and garbage bags are among the categories outside it — along with food packaging, shrink wrap, pallet wrap and agricultural films.
If your facility has held back liner orders while waiting for clarity, this is it. Waste management was never the target of the ban; retail carrier bags were.
Selection
Choosing the right liner
Most liner complaints trace back to one of three decisions.
Material
HDPE gives higher tensile strength at a lower gauge and suits heavy general waste. LDPE is softer and more puncture-tolerant — the choice where waste has edges, such as glass, offcuts or construction debris.
Gauge
Specify it against the weight the bag carries and how far it is dragged, not the price per piece. A liner that splits on the way to the skip costs more than the micron it saved.
Size
The liner has to fit the bin with enough over the rim to fold back. Too small and it slips in; too large and you pay for film that sits inside the bin.
By sector
- Hotels and hospitality
- Consistent supply in room-bin and kitchen sizes, with a clean appearance.
- Malls and retail
- High volume in large formats that survive back-of-house handling.
- Municipal and contract cleaning
- Cost per litre of capacity, and resistance to dragging and tearing.
- Offices
- Smaller formats at a lighter gauge.
- Construction and industrial
- Heavy gauge for sharp, dense waste.
Specification
Sizes and specifications
| Property | What we supply |
|---|---|
| Material | HDPE or LDPE, chosen for the waste stream |
| Size | Made to your width and length |
| Gauge | Specified to the load the bag carries |
| Colour | Black, red, green and blue |
| Format | Flat-packed or on a roll |
| Available for facility branding or waste-stream labelling | |
| Recycled content | GRS-certified recycled content, on request |
Replacing a liner you already buy? Send the pack or a photo of it with its dimensions. Matching what already works is faster than specifying from scratch.
Manufacturing
Made in Karachi, to your specification
We extrude and convert liners on our own lines. Material is chosen for the waste stream, film is run to the gauge you specify, and bags are converted and packed to your format.
- Established
- 1971 — 55 years of manufacturing
- Capacity
- 500 MT per month
- Certification
- ISO 22000 · Halal · GRS
- Plant
- Shershah, Karachi
Cost
What moves the price
Buyers in this category compare price per piece, which is the wrong measure. The right one is cost per volume of waste removed without a failure. These are the decisions that move it.
- Gauge
- The dominant factor. Most over-spend here is gauge bought out of habit.
- Size
- Film is priced by weight, so area and gauge together set the cost.
- Material
- HDPE usually does the job at a lower gauge than LDPE.
- Resin price
- Polyethylene prices move with the market. Any quote worth having is dated.
- Format
- Flat-packed and rolled liners are different conversions.
- Run length
- Consolidating sizes across a site usually beats ordering each one separately.
Specification desk
Send your specification
Tell us what the liner has to do and we will specify it. We reply within four working hours, Monday to Saturday, 9am to 5pm PKT.
- Size, or the bin it has to fit
- Gauge, or the load it carries
- Material, if you have a preference
- Colour and quantity
- Replacing a liner? Email a photo of the pack to polybags@tpl.com.pk
Questions
Garbage bags: common buyer questions
Are garbage bags banned in Sindh?
No. The Sindh Environmental Protection Agency has confirmed the ban applies to single-use shopping and carrier bags. Garbage bags are outside its scope, along with food packaging, shrink wrap and pallet wrap.
What is the difference between HDPE and LDPE bin liners?
HDPE is stronger at the same gauge and suits heavy general waste. LDPE is softer and more puncture-tolerant, which suits waste with sharp edges. Tell us the waste type and we will specify it.
What gauge do I need?
It depends on the weight and whether the bag is carried or dragged. Give us the load rather than a micron figure and we will specify the gauge.
What sizes do you make?
Liners are made to order, to your width and length. If you are replacing a liner you already buy, send its dimensions or a photo of the pack and we will quote against it.
Which colours are available?
Black, red, green and blue. Tell us the colour you need when you send your specification.
Can liners be printed with our facility name?
Yes. Printing is available for facility branding or waste-stream labelling.
Send the specification. We reply within four working hours.
Size, gauge, material and quantity — or a photograph of the liner you buy today. Karachi desk, Monday to Saturday, 9am to 5pm PKT.