Optimize Cost Request a quote

Exporter's guide · Textile and apparel

Garment Polybag Specification Guide for Textile Exporters

A garment polybag looks simple until a shipment is held because the warning text is too small or the recycled-content claim cannot be proven. This guide walks through size, thickness, closures, suffocation warnings and GRS recycled content, the points your buyer's packaging manual checks. The spec builder turns your answers into a specification you can send to any supplier.

Folded garments packed in clear polythene bags on a packing table
Folded garments in clear polybags, ready for cartons.

What your buyer's packaging manual controls

Large apparel brands publish a packaging or vendor manual, and the polybag section is usually detailed. It typically fixes:

  • Bag size for each fold or product type, and whether a flap is needed
  • Material and minimum or maximum thickness
  • Suffocation warning wording, languages, font size and position
  • Vent holes, size stickers and barcode placement
  • Recycled content percentage, and the certificate that proves it

Read that section before you ask for quotes, and send it to your supplier with your request. Every point below is something a manual can override.

How to size a garment polybag

Folded garments

Measure the garment as it will be packed: folded width, folded length and the depth of the folded stack. A bag that is too tight creases the garment and splits at the seam. One that is too loose looks untidy and wastes film.

Bag width = folded width + depth + about 1 inch
Bag length = folded length + depth + about 1 inch, plus the flap

A men's shirt folded to 10 × 14 inches and about 1 inch deep fits a 12 × 16 inch bag with a 2 inch flap.

Hanging garments

Suits, dresses and jackets that ship on hangers use a longer garment cover with a hole or slit at the top for the hanger hook, often with gussets to allow for the garment's depth. Measure the shoulder width and the full hanging length, and allow extra at the bottom so the hem is covered.

Interactive

Garment polybag spec builder

Fill this in and copy the result, or email it to us for a quote.

Bag size
12 × 16 in, plus 2 in flap
Thickness
38 micron (about 150 gauge)
Warning font
At least 14 pt
Approx. bags per kg
about 109
Email it for a quote

Sizing uses the rule above. Always check against your buyer's manual and approve a sample before bulk production.

Thickness and material

Most folded apparel is packed in 25 to 50 micron film, which is roughly 100 to 200 gauge. Light T-shirts and lingerie sit at the low end. Denim, knitwear and multi-packs need the upper end. Heavy items or anything with hard trims may need more. Our micron and gauge guide explains the units and has a bags-per-kg calculator.

Film materials for garment polybags
MaterialLook and feelTypical use
LDPEClear, soft, quiet, easy to sealThe standard choice for most folded garments
PP filmCrystal clear and glossy, stifferShirts and premium display packs where clarity sells
HDPETranslucent, crisp, strong for its weightInner bags, bulk packs and cost-sensitive programmes
Clear garment polybags with a self-adhesive tape flap closure
Self-adhesive flap bags are the most common closure for folded garments.

Suffocation warnings

The wording

There is no single global wording, but buyers usually ask for a clear "WARNING" or "CAUTION" heading, a statement of the risk, an instruction to keep the bag away from babies and children, and a note that the bag is not a toy. A widely used version is:

WARNING: To avoid danger of suffocation, keep this plastic bag away from babies and children. This bag is not a toy.

Many buyers add a line telling people not to use the bag in cribs, beds, carriages or playpens.

Several US states and cities write warning rules into law, mostly for thin bags of 1 mil (25.4 microns) or less with large openings. Many retailers go further and require the warning on every polybag. For EU and UK buyers, the warning languages are normally set in the buyer's manual.

Minimum font size

The common guidance, summarised by EcoEnclose, sets the minimum font size by the bag's width plus length:

Minimum suffocation warning font size
Bag width + lengthMinimum font size
Under 25 inches10 point
25 to 39 inches14 point
40 to 59 inches18 point
60 inches or more24 point

Massachusetts also requires the warning on both sides of the bag, repeated at 20-inch intervals on bags larger than 40 inches combined.

Vent holes

Small punched holes let air out when cartons are packed and reduce the suffocation risk. Most garment programmes ask for them. Confirm the number and position, because holes near the garment can let dust in.

Recycled content, GRS and PPWR

What GRS certification proves

The Global Recycled Standard, run by Textile Exchange, verifies recycled content and its chain of custody. According to Textile Exchange, a product needs at least 20% recycled content to use GRS in business-to-business trade, and at least 50% to carry GRS labelling aimed at consumers. Tanvir Packages is GRS certified, so recycled-content bags can ship with the transaction certificate your buyer's compliance team checks. See textile and apparel packaging.

The EU recycled-content rule

The EU Packaging and Packaging Waste Regulation, Regulation (EU) 2025/40, sets minimum recycled content for plastic packaging from 1 January 2030. For plastic packaging that is not contact-sensitive, which includes garment polybags, the target is 35%. EU brands are already asking suppliers to plan for it. Our PPWR packaging page covers what applies now and what comes later.

Write the percentage down. "Recycled" on a quote means nothing on its own. Specify the percentage, ask for GRS certification, and ask for a transaction certificate with the shipment.

Closures and extras

  • Self-adhesive flap: the standard for folded garments. Check the release liner peels cleanly on your packing line.
  • Zip lock: for accessories, socks and multi-packs the customer will reopen. See zip lock bags.
  • Hanger hole or slit: for hanging garments and garment covers.
  • Size sticker or barcode area: keep it clear of print and the warning.
  • Printing: a logo or brand message in one or two colours. See custom printed polybags.

Pre-shipment checklist

  • Bag size matches the manual for each style and fold
  • Thickness measured on a sample and matches the specification
  • Warning wording, languages, font size and both-side printing approved
  • Vent holes present and in the right position
  • Flap adhesive holds and the release liner peels cleanly
  • Recycled content certificate and transaction certificate in hand, if claimed
  • Bags packed clean and dry, and cartons labelled by size

Frequently asked questions

What thickness should a garment polybag be?

Most folded garments are packed in 25 to 50 micron film, about 100 to 200 gauge. Light items sit at the low end and denim or knitwear at the high end. Your buyer's packaging manual may set a minimum.

How do I work out the right polybag size?

Measure the folded garment's width, length and depth. Add the depth plus about an inch to both width and length, then add the flap. A shirt folded to 10 × 14 inches and 1 inch deep fits a 12 × 16 inch bag with a 2 inch flap.

Is a suffocation warning required on every polybag?

Laws vary by country and state, and many apply to thin bags with large openings. Most international retailers require the warning on every polybag anyway, so follow your buyer's manual.

What font size should the warning be?

It depends on the bag's width plus length: 10 point under 25 inches, 14 point from 25 to 39 inches, 18 point from 40 to 59 inches and 24 point for 60 inches or more.

What is the difference between 20% and 50% recycled content under GRS?

At least 20% recycled content lets a product use GRS in business-to-business trade. At least 50% is needed to put GRS labelling on consumer-facing materials.

Do garment polybags need recycled content for the EU?

Under the EU PPWR, plastic packaging that is not contact-sensitive needs at least 35% recycled content from 1 January 2030. Many EU brands already ask suppliers for recycled content and GRS certification now.

What is the minimum order for garment polybags?

100 kg for plain bags and 300 kg for printed bags, made to your sizes in Karachi.

Sources

  1. GRS minimum content: 20% and 50%, Textile Exchange
  2. Suffocation warnings: packaging requirements and legal guidelines, EcoEnclose
  3. Regulation (EU) 2025/40 on packaging and packaging waste, EUR-Lex
  4. Recycled content in plastic packaging: Article 7 of the PPWR, Greiner Packaging

Send us your buyer's packaging manual.

We'll match size, micron, warning and recycled content to it, from a GRS, ISO 22000 and Halal certified plant in Karachi.

Scroll to Top