Optimize Cost Request a quote

Buyer's guide · Polythene bags

Micron, Gauge and Bags per kg: How to Read a Polythene Bag Quote

Two quotes for the "same" bag can differ by a quarter in what you actually pay per bag. The difference is almost always thickness and size. This guide shows how micron, gauge and mil relate, how to work out bags per kg yourself, and how to compare quotes fairly. Two free calculators are built in.

Clear polyethylene film rolls in different widths, made to order in Karachi
Film is extruded to a thickness in microns, then converted into bags.

Micron, gauge and mil: three ways to say thickness

Polythene film is thin enough that thickness is measured in very small units. In Pakistan you will hear all three of these, sometimes in the same conversation:

  • Micron (µm): one thousandth of a millimetre. This is the metric unit and the one we write on our specification sheets.
  • Gauge: an older trade unit. 100 gauge equals 1 mil.
  • Mil: one thousandth of an inch, used mostly by American buyers. 1 mil equals 25.4 microns.

Put together, 1 micron ≈ 3.94 gauge and 1 gauge = 0.254 micron. Most people round this to "multiply microns by four to get gauge", which is close enough for conversation but not for a contract.

Quick conversion table

Common film thicknesses in micron, gauge and mil
Micron (µm)GaugeMil
12470.47
20790.79
25980.98
381501.50
501971.97
752952.95
1003943.94
1505915.91
2007877.87

Calculator

Thickness converter

Type a thickness and pick its unit. The other units update as you type.

Micron
50
Gauge
197
Mil
1.97
Millimetre
0.050

Why "gauge" causes confusion

Gauge is used loosely in the market. Some traders say "gauge" when they mean micron, and some quote a round number such as "200 gauge" for film that is really 45 microns. If a quote is given in gauge, ask for the micron figure in writing. It costs the supplier nothing and protects you when you check the delivery.

How to work out bags per kg

Polythene bags are made and sold by weight, so the number you need is how many bags you get in each kilogram. You can work it out with four numbers: width, length, thickness and the density of the film.

The formula

Bag weight (g) = width (cm) × length (cm) × 2 × thickness (µm) ÷ 10,000 × density

Bags per kg = 1,000 ÷ bag weight (g)

The "× 2" is there because a flat bag has a front and a back. Density is how heavy the plastic is for its volume. For the films used in bags it is close to one gram per cubic centimetre:

Worked example: a 1 kg rice bag

A common packing bag for 1 kg of rice or sugar is LDPE, 8 × 12 inches, 60 microns. In centimetres that is 20.32 × 30.48.

  1. 20.32 × 30.48 × 2 = 1,238.7 square centimetres of film
  2. × 60 µm ÷ 10,000 = 7.43 cubic centimetres
  3. × 0.92 density = 6.84 g per bag
  4. 1,000 ÷ 6.84 = about 146 bags per kg

So a 100 kg order of this bag is roughly 14,600 bags. Our 1 kg and ½ kg packing bags page lists bags per kg for the other common food pack sizes.

Calculator

Bags per kg calculator

Enter your bag. If you have a quoted rate per kg, add it to see the cost per bag.

Weight per bag
6.84 g
Bags per kg
146
Bags in 100 kg
14,600
Kg per 1,000 bags
6.84 kg

Flat or side-gusseted bags, no handle cut-out. Seals, flaps and print add a little weight, so allow about ±5%.

Gusseted bags

A side gusset adds film. If the gusset opens out to a depth of G on each side, add G to the width before you multiply: width becomes (W + G). The calculator does this for you.

What the formula leaves out

Real bags carry seals, a flap, a die-cut handle or print. A handle cut-out removes film, a flap adds it, and ink adds a little weight. For a quote comparison the formula is accurate enough. For a contract, ask the supplier for the weight per 1,000 bags.

Polyethylene film bubble rising from a blown film die, where the film thickness is set
Thickness is set at extrusion, as the film bubble is blown and drawn up from the die.

Typical thickness by use

These are common starting points across the industry, not fixed rules. Your product, its weight and how it is handled decide the final figure.

Typical starting thickness for common polythene packaging
UseTypical micronApprox. gaugeRead more
Garment and apparel polybags25–50100–200Garment polybag guide
Food packing bags, ½–1 kg50–75200–3001 kg packing bags
Carton liners50–100200–400LDPE liner bags
Drum liners100–150400–600Poly bags and liners
Garbage bags15–5060–200Garbage bags
Stretch film17–2567–98Stretch film rolls
PE shrink film40–100157–394Shrink and stretch film

LDPE, HDPE or PP?

Material changes how thick the film needs to be. HDPE is stiffer and stronger for its weight, so an HDPE bag can often be thinner than an LDPE bag doing the same job. LDPE is softer, clearer and seals easily. Film-based PP gives the most sparkle and clarity for display packs. Our guide to HDPE and LDPE polybags compares the two in detail, and you can see the ranges on our LDPE bags, HDPE bags and PP bags pages.

Compare quotes on cost per bag, not rate per kg

Because film is sold by weight, the per-kg rate on its own tells you very little. What you pay for each bag is:

Cost per bag = rate per kg ÷ bags per kg

Take two suppliers quoting the same 8 × 12 inch LDPE bag. Supplier A quotes 70 microns and Supplier B quotes 60 microns. At 70 microns you get about 125 bags per kg. At 60 microns you get about 146. That is 17% more bags from every kilogram, so Supplier B can charge up to about 17% more per kg and still cost you less per bag.

Before you compare: make sure both quotes are for the same size, the same micron, the same material and the same print. If one supplier will not state the micron, that is your answer.

Thicker is not automatically better either. A bag that is 10 microns thicker than it needs to be costs you on every bag, every month. A good supplier specifies the thinnest film that does the job reliably. If you want a second opinion on an existing specification, send it to our packaging cost review.

How to check the thickness you received

With a micrometer

A dial or digital micrometer measures a single layer of film. Cut a strip across the width of the bag, take readings at five or more points, and average them. Film always varies a little across the width, so a single reading can mislead.

With a scale: the weigh-count test

No micrometer? Weigh 100 bags on an accurate scale and divide by 100. Compare that with the bag weight from the calculator above. If 100 bags of the example 8 × 12 inch, 60 micron bag weigh about 620 g instead of 684 g, the film is closer to 54 microns than 60.

What to put in your request for quotation

  • Product packed and fill weight
  • Material: LDPE, LLDPE, HDPE or PP
  • Width × length, and gusset or flap if any
  • Thickness in microns
  • Plain or printed, and the number of colours
  • Quantity per month
  • Food-contact documents, if the bag touches food

Our minimum order is 100 kg for plain bags and 300 kg for printed bags. Send the list above through our quote request page and we will reply with a written specification you can hold us to.

Frequently asked questions

How many gauge is 1 micron?

1 micron is about 3.94 gauge. In practice people multiply microns by four, so 50 microns is roughly 200 gauge.

Is 200 gauge the same as 50 micron?

Almost. 200 gauge is 2 mil, which is 50.8 microns. For buying purposes they are the same thickness, but always ask for the micron figure in writing.

How many polythene bags are there in 1 kg?

It depends on size and thickness. An 8 × 12 inch LDPE bag at 60 microns weighs about 6.84 g, so there are about 146 bags in 1 kg. A 7 × 10 inch bag at 50 microns gives about 240 bags per kg.

Why are polythene bags sold by weight, not by the piece?

Film is extruded from resin that is bought by weight, and the number of bags per kilogram changes with every size and thickness. A per-kg rate lets a factory quote any size fairly. To compare quotes, convert the rate to cost per bag.

Is a thicker bag always better?

No. A thicker bag weighs more, so you get fewer bags per kilogram and pay more per bag. The right thickness is the thinnest film that carries your product reliably through filling, sealing and handling.

How can I check the thickness of bags I have received?

Measure a single layer with a micrometer at five or more points and average the readings. Without a micrometer, weigh 100 bags and compare the weight per bag with the calculated weight.

What is the minimum order at Tanvir Packages?

100 kg for plain bags and 300 kg for printed bags, made to your size and thickness at our plant in Karachi.

Sources

  1. Gauge to mil to micron conversion, iPack
  2. Low-density polyethylene, Wikipedia (density)
  3. High-density polyethylene, Wikipedia (density)
  4. Polypropylene, Wikipedia (density)

Send your bag size. We'll send the specification.

Made to order in Karachi since 1971, from an ISO 22000, Halal and GRS certified plant, at the lowest possible factory rate.

Scroll to Top